BRAKE MASTER CYLINDER REMOVAL


  1. DRAIN BRAKE FLUID

    Note

    Wash off brake fluid immediately if it comes in contact with any painted surface.

  2. REMOVE BRAKE MASTER CYLINDER


    1. B007PNBE02

      Using a union nut wrench, disconnect the 2 brake tubes from the master cylinder.

    2. Disconnect the warning switch connector.

    3. B007UG2

      for Manual Transmission:

      Slide the clip and separate the clutch reservoir tube.

    4. B007TGO

      Remove the 2 nuts, and disconnect the bracket.

    5. Remove the brake master cylinder from brake booster.