ТОПЛИВНЫЙ НАСОС ПОВТОРНАЯ СБОРКА

CAUTION / NOTICE / HINT

Note

Do not try to remove the black nylon tube as it is welded to the fuel suction tube assembly.

Click here

PROCEDURE


  1. INSTALL FUEL WITH FILTER PUMP ASSEMBLY

    Tech Tips

    Perform "Inspection After Repair" after replacing the fuel with filter pump assembly.

    Click here


    1. B003Q60

      Install the fuel pump harness and connect the fuel pump connector.

    2. Apply a light coat of gasoline to a new O-ring.

    3. B003QXQC01
      *1 O-Ring
      *2 Spacer
      *a Supporter

      Install the O-ring and spacer to the supporter of the fuel pump as shown in the illustration.

    4. B003KA8

      Attach the 3 claws to the claw holes and install the fuel pump and suction filter assembly.

  2. INSTALL NO. 1 FUEL SUB-TANK


    1. B003J8E

      Attach the 2 claws to the claw holes and install the No. 1 fuel sub-tank.

    2. B003QFB

      Attach the 3 claws to the claw holes.

    3. B003O9M

      Connect the fuel tube and wire harness.

    4. B003KDM

      Attach the claw on the end of the tube to the claw hole. Connect the tube to the 2 clamps on the No. 1 fuel sub-tank.

    5. B003S3S

      Connect the fuel pump connector and wire harness.

  3. INSTALL FUEL SENDER GAUGE ASSEMBLY

    Click here