FRONT WIPER MOTOR ON-VEHICLE INSPECTION

PROCEDURE

  1. INSPECT FRONT WIPER MOTOR AND LINK ASSEMBLY (for LHD)

    1. E189924E02

      Operate the front wipers while spraying washer fluid on the windshield glass. Make sure that the front wipers function properly and the wipers do not come into contact with the vehicle body.

      Standard

      Area

      Standard Condition

      *1

      Approx. 25.0 mm (0.984 in.)

      *2

      Approx. 51.6 mm (2.03 in.)

    2. Stop the front wiper motor and link assembly operation.

    3. E184700E04

      Check the automatic stop position.

      Table 1. Text in Illustration

      *1

      Louver Edge

      OK

      The front wipers stop at the positions shown in the illustration.

      Standard

      Area

      Standard Condition

      A

      26.1 to 41.1 mm (1.03 to 1.62 in.)

      B

      Approx. 29.7 mm (1.17 in.)

      C

      17.5 to 32.5 mm (0.689 to 1.28 in.)

      D

      Approx. 25.0 mm (0.984 in.)

      If the result is not as specified, remove and reinstall the wiper arm and blade assembly, and perform the on-vehicle inspection described above to inspect the wiper motor and link assembly again.

      If the result is not as specified again, inspect the wiper motor and link assembly with it removed from the vehicle body (Click here).

  2. INSPECT FRONT WIPER MOTOR AND LINK ASSEMBLY (for RHD)

    1. E189925E02

      Operate the front wipers while spraying washer fluid on the windshield glass. Make sure that the front wipers function properly and the wipers do not come into contact with the vehicle body.

      Standard

      Area

      Standard Condition

      *1

      Approx. 25.0 mm (0.984 in.)

      *2

      Approx. 51.6 mm (2.03 in.)

    2. Stop the front wiper motor and link assembly operation.

    3. E184701E02

      Check the automatic stop position.

      Table 2. Text in Illustration

      *1

      Louver Edge

      OK

      The front wipers stop at the positions shown in the illustration.

      Standard

      Area

      Standard Condition

      A

      26.1 to 41.1 mm (1.03 to 1.62 in.)

      B

      Approx. 29.7 mm (1.17 in.)

      C

      17.5 to 32.5 mm (0.689 to 1.28 in.)

      D

      Approx. 25.0 mm (0.984 in.)

      If the result is not as specified, remove and reinstall the wiper arm and blade assembly, and perform the on-vehicle inspection described above to inspect the wiper motor and link assembly again.

      If the result is not as specified again, inspect the wiper motor and link assembly with it removed from the vehicle body (Click here).