FRONT SHOCK ABSORBER DISPOSAL

PROCEDURE


  1. DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY

    CAUTION:


    • Always use a cloth to prevent shards of metal flying about due to the release of pressurized gas.

    • Always wear safety glasses.

    B004MKP

    Tech Tips

    The gas is colorless, odorless and non-poisonous.


    1. B004NTYN01

      Place the front shock absorber horizontally with the piston rod extended, and using a hacksaw, make a hole of around 4 mm depth between (A) and (B) shown in the illustration to expose the hollow core.

      Tech Tips

      Some front shock absorbers do not have a hollow core, but it is necessary to perform this step as a precaution.

    2. Place the front shock absorber horizontally with the piston rod extended, and using a hacksaw, make a hole between (C) and (D) shown in the illustration to discharge the gas inside.