BLIND SPOT MONITOR SYSTEM, Diagnostic DTC:C1AB6

DTC Code DTC Name
C1AB6 Blind Spot Monitor Master Module

DESCRIPTION

This DTC is stored when the blind spot monitor sensor LH detects an internal malfunction.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C1AB6

Blind Spot Monitor Master Module

The blind spot monitor sensor LH (master) detects an internal malfunction.

Blind spot monitor sensor LH

CAUTION / NOTICE / HINT

Note:

When checking for DTCs, make sure that the blind spot monitor main switch (warning cancel switch assembly*1 or telltale light assembly*2) is on.

PROCEDURE

  1. CHECK DTC

    1. Clear the DTCs.

      Click here

      Body Electrical > Blind Spot Monitor Master > Clear DTCs

    2. Recheck for DTCs and check if the same DTC is output again.

      Click here

      Body Electrical > Blind Spot Monitor Master > Trouble Codes

    Result

    Proceed to

    No DTCs are output

    DTCs are output
    No DTCs are output

    USE SIMULATION METHOD TO CHECK

    Click hereClick hereClick hereClick here

    DTCs are output

    REPLACE BLIND SPOT MONITOR SENSOR LH

    Click here