BRAKE SYSTEM


  1. CONSTRUCTION


    1. A 10.5" single diaphragm type brake booster is used on models with a gasoline engine.

      Figure 1. Models with 1TR-FE or 2TR-FE Engine

      A01T0IZC01
      *1 Vacuum Check Valve - -
      *a A - A Cross Section - -

      Figure 2. Models with 1GR-FE Engine

      A01T0JJC01
      *1 Vacuum Check Valve - -
      *a A - A Cross Section - -

    2. A 10" single diaphragm type brake booster is used on models with a diesel engine.

    3. A vacuum sensor assembly, which detects the brake booster vacuum pressure and sends a signal to the engine stop and start ECU, is installed to the brake booster.*


      • *: Models with stop and start system

      Figure 3. LHD Models with Diesel Engine

      A01T0J6C01
      *A Models with Stop and Start System - -
      *1 Vacuum Check Valve *2 Vacuum Warning Switch Assembly
      *3 Vacuum Sensor Assembly - -
      *a A - A Cross Section - -

      Figure 4. RHD Models with Diesel Engine

      A01T0I4C01
      *A Models with Stop and Start System - -
      *1 Vacuum Check Valve *2 Vacuum Sensor Assembly
      *3 Vacuum Warning Switch Assembly - -
      *a A - A Cross Section - -