REAR DIFFERENTIAL LOCK CONTROL SWITCH REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. PRECAUTION

   Note

   After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

   Click here

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   CAUTION:

   Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

3. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

   Click here

4. REMOVE AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)

   Click here

5. REMOVE INTEGRATION PANEL SUB-ASSEMBLY (for Manual Cooler System)

   Click here

6. REMOVE LOWER STEERING COLUMN COVER

   Click here

7. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

8. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

   Click here

9. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

   Click here

10. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

    Click here

11. REMOVE LOWER INSTRUMENT COVER SUB-ASSEMBLY

    Click here

12. REMOVE DIFFERENTIAL LOCK SWITCH

    
    

    1. 

       Remove in this Direction

       Disconnect the differential lock switch connector.

    2. Detach the 2 claws and remove the differential lock switch from the lower instrument cover sub-assembly.