STEERING GEAR COMPONENTS
ILLUSTRATION
*A |
for AD Series Engine |
*B |
for 3ZR-FAE Engine |
*C |
for 2WD |
*D |
for 4WD / AWD |
*1 |
FRONT FLOOR COVER |
*2 |
NO. 1 ENGINE UNDER COVER |
*3 |
NO. 2 ENGINE UNDER COVER |
*4 |
REAR ENGINE UNDER COVER LH |
*5 |
REAR ENGINE UNDER COVER RH |
- |
- |
 |
Specified torque: N*m (kgf*cm, ft.*lbf) |
- |
- |
ILLUSTRATION
*A |
for 2AR and 3ZR-FE Engine |
*B |
for Half Cover Type |
*C |
for Full Cover Type |
*D |
w/ Front Floor Cover |
*1 |
FRONT FLOOR COVER |
*2 |
NO. 1 ENGINE UNDER COVER |
*3 |
NO. 2 ENGINE UNDER COVER |
*4 |
TIE ROD END SUB-ASSEMBLY LH |
*5 |
TIE ROD END SUB-ASSEMBLY RH |
- |
- |
|
Specified torque: N*m (kgf*cm, ft.*lbf) |
- |
- |
ILLUSTRATION
*A |
for 3ZR-FE (2WD) and 1AD-FTV |
- |
- |
*1 |
FRONT SUSPENSION MEMBER REAR BRACE LH |
*2 |
FRONT SUSPENSION MEMBER REAR BRACE RH |
*3 |
FRONT SUSPENSION MEMBER REINFORCEMENT LH |
*4 |
FRONT SUSPENSION MEMBER REINFORCEMENT RH |
*5 |
LOWER ENGINE FRONT MOUNTING BRACKET REINFORCEMENT |
- |
- |
|
Specified torque: N*m (kgf*cm, ft.*lbf) |
- |
- |
ILLUSTRATION
*A |
for ZR Series Engine RHD |
- |
- |
*1 |
COLUMN HOLE COVER SILENCER SHEET |
*2 |
FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY |
*3 |
NO. 1 STEERING COLUMN HOLE COVER SUB-ASSEMBLY |
*4 |
NO. 2 STEERING INTERMEDIATE SHAFT ASSEMBLY |
*5 |
STEERING GEAR HEAT INSULATOR |
*6 |
STEERING INTERMEDIATE SHAFT |
*7 |
Clamp |
- |
- |
|
Specified torque: N*m (kgf*cm, ft.*lbf) |
● |
Non-reusable part |
ILLUSTRATION
*1 |
FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY |
*2 |
STEERING GEAR ASSEMBLY |
|
Specified torque: N*m (kgf*cm, ft.*lbf) |
- |
- |
ILLUSTRATION
*1 |
NO. 1 STEERING RACK BOOT |
*2 |
NO. 1 STEERING RACK BOOT CLAMP |
*3 |
NO. 2 STEERING RACK BOOT |
*4 |
NO. 2 STEERING RACK BOOT CLAMP |
*5 |
STEERING GEAR ASSEMBLY |
*6 |
STEERING RACK BOOT CLIP |
*7 |
TIE ROD END SUB-ASSEMBLY LH |
*8 |
TIE ROD END SUB-ASSEMBLY RH |
|
Specified torque: N*m (kgf*cm, ft.*lbf) |
● |
Non-reusable part |
 |
Lithium soap base glycol grease |
- |
- |