SHIFT PADDLE SWITCH INSPECTION

PROCEDURE

  1. INSPECT SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)

    1. C207558C25

      *a

      Component without harness connected

      (Shift Paddle Switch (Transmission Shift Switch Assembly) LH)

      *b

      Component without harness connected

      (Shift Paddle Switch (Transmission Shift Switch Assembly) RH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Table 1. Shift Paddle Switch (Transmission Shift Switch Assembly) LH:

      Tester Connection

      Condition

      Specified Condition

      2 (SFTD) - 3 (ECC)

      "-" continuously pulled

      Below 3 Ω

      Released

      10 kΩ or higher

      2 (SFTD) - 4 (ECC1)

      "-" continuously pulled

      Below 3 Ω

      Released

      10 kΩ or higher

      If the result is not as specified, replace the shift paddle switch (transmission shift switch assembly) LH.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Table 2. Shift Paddle Switch (Transmission Shift Switch Assembly) RH:

      Tester Connection

      Condition

      Specified Condition

      3 (SFTU) - 2 (ECC1)

      "+" continuously pulled

      Below 3 Ω

      Released

      10 kΩ or higher

      If the result is not as specified, replace the shift paddle switch (transmission shift switch assembly) RH.