AUDIO AND VISUAL SYSTEM (for Radio Receiver Type) Cassette Tape cannot be Ejected

INSPECTION PROCEDURE

PROCEDURE

1. PRESS ''EJECT'' AND CHECK OPERATION

   
   

   1. Press the cassette tape EJECT switch of the radio receiver for 2 seconds or more and check that the cassette tape is ejected.

      OK
      Cassette tape is ejected.

   
   

   NG

   PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here

   OK

2. CHECK CASSETTE TAPE

   
   

   1. Check that the ejected cassette tape does not have a peeling label, cassette body deformation or other problems.

      OK
      No problems with cassette tape.

   
   

   NG

   CASSETTE TAPE IS FAULTY

   OK

3. REPLACE CASSETTE TAPE WITH ANOTHER AND RECHECK

   
   

   1. Replace the cassette tape with a normal one and check if the same problem occurs again.

      OK
      Malfunction disappears.

   
   

   NG

   PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here

   OK

   CASSETTE TAPE IS FAULTY