ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION

CAUTION / NOTICE / HINT

Tip:

Perform "Inspection After Repairs" after replacing the engine coolant temperature sensor.

PROCEDURE

  1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

    Tip:

    Perform "Inspection After Repairs" after replacing the engine coolant temperature sensor.

    1. A369689C01

      *1

      Engine Coolant Temperature Sensor

      *2

      Gasket

      *a

      Torque Wrench Fulcrum Length

      *b

      19 mm Ball Joint Lock Nut Wrench

      Using a 19 mm ball joint lock nut wrench, install a new gasket and engine coolant temperature sensor.

      Torque

      Specified tightening torque

      19.6 N*m (200 kgf*cm, 14 ft.*lbf)

      Tip:

      • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

        Click hereClick hereClick hereClick here

      • When using ball joint lock nut wrench (fulcrum length of 150 mm (5.91 in.)) + torque wrench (fulcrum length of 162 mm (6.38 in.)): 10.2 N*m (104 kgf*cm, 8 ft.*lbf)

    2. Connect the 2 ground wires with the 2 bolts.

      8.4 N*m

      86 kgf*cm

      74 in.*lbf

    3. Connect the engine coolant temperature sensor connector.

  2. ADD ENGINE COOLANT

    Click here

  3. INSPECT FOR COOLANT LEAK

    Click here

  4. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here