MASS AIR FLOW METER INSTALLATION

PROCEDURE

1. INSTALL MASS AIR FLOW METER SUB-ASSEMBLY

   Tip:

   Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

   Click hereClick here

   1. Install the mass air flow meter sub-assembly to the air cleaner cap sub-assembly with the 2 screws.

      1.4 N*m

      14 kgf*cm

      12 in.*lbf

      Note:

      • If the mass air flow meter sub-assembly has been struck or dropped, replace it.

      • If reusing the mass air flow meter sub-assembly, be sure to inspect the gasket.

      • Make sure that the gasket is not cracked or moved out of place when installing the mass air flow meter sub-assembly.

   2. Connect the mass air flow meter sub-assembly connector.

2. PERFORM INITIALIZATION

   1. Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

      Click hereClick here