GENERATOR (for BOSCH Made) REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE AIR CLEANER ASSEMBLY


    1. w/o EGR Cooler:

      Disconnect the ventilation hose.

    2. w/ Mass Air Flow Meter:

      Disconnect the mass air flow meter sensor connector.

    3. w/ Intake Air Temperature Sensor:

      Disconnect the intake air temperature sensor connector.

    4. Loosen the hose clamp.

    5. Remove the 2 bolts and air cleaner assembly.

  3. REMOVE FAN AND GENERATOR V BELT


    1. A01E0B4E01

      Using the pulley set bolt of the tensioner, rotate the tensioner pulley clockwise to loosen the belt's tension. Then remove the V belt.

  4. REMOVE GENERATOR ASSEMBLY

    A01DXLF

    1. Remove the nut and generator wire.

    2. Disconnect the generator connector.

    3. Remove the 2 bolts and generator.