REAR SUNSHADE ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE REAR SEAT ASSEMBLY

    Click here

  2. REMOVE CENTER STOP LIGHT SET

    Click here

  3. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY LH

    Click here

  4. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  5. REMOVE INNER ROOF SIDE GARNISH LH

    Click here

  6. REMOVE INNER ROOF SIDE GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

  7. REMOVE REAR SEAT SHOULDER BELT HOLE COVER

    Click here

  8. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY

    Click here

  9. REMOVE NO. 1 UPPER BACK PANEL HOLE COVER


    1. Remove the No. 1 upper back panel hole cover.

  10. REMOVE NO. 2 PACKAGE TRAY TRIM PANEL ASSEMBLY


    1. B0084HPC01
      B00847Z Remove in this Direction

      Disengage the 3 clips as shown in the illustration.

    2. B0086XVC01
      B00847Z Remove in this Direction

      Disengage the 5 guides to remove the No. 2 package tray trim panel assembly as shown in the illustration.

  11. REMOVE REAR WINDOW SHADE ASSEMBLY


    1. B0086CQN01

      Disconnect the connector.

    2. Remove the 3 bolts (A).

    3. Loosen the bolt (B) and remove the rear window shade assembly.

      Note

      Bolt (B) cannot be removed from the rear window shade assembly.