STOP AND START SYSTEM CANCEL SWITCH ASSEMBLY(for Hatchback, Wagon) REMOVAL

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE

  1. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here

  2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)

    Click here

  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for CVT)

    Click here

  4. REMOVE SHIFTING HOLE BEZEL (for Manual Transaxle)

    Click here

  5. REMOVE POSITION INDICATOR HOUSING ASSEMBLY (for CVT)

    Click here

  6. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

    Click here

  7. REMOVE UPPER CONSOLE PANEL

    Click here

  8. REMOVE ECO RUN CANCEL SWITCH ASSEMBLY (COMBINATION SWITCH ASSEMBLY)

    1. C326557

      Disengage the 4 claws to remove the eco run cancel switch assembly (combination switch assembly) from the upper console panel.