THEFT DETERRENT SYSTEM


  1. OUTLINE


    1. The theft deterrent system is controlled by the main body ECU (multiplex network body ECU). The theft deterrent system will operate when an attempt is made to forcibly enter the vehicle or open the engine hood, when the battery terminals are removed and reconnected, when objects moving in the cabin are detected*1 or when the vehicle is determined to be sloping*2.

    2. The system consists of power door lock control system parts, entry and start system parts, a theft warning radar sensor*1, a tilt sensor*2, a security indicator light, a security horn and a theft warning siren assembly*3.


      • *1: Models with theft warning radar sensor

      • *2: Models with tilt sensor

      • *3: Models with theft warning siren assembly

  2. SPECIFICATION


    1. The warning specifications of this system are listed below:

      Warning Method Hazard Warning Lights Blink
      Vehicle Horn Sounds a warning on a 0.4 second cycle (approximately)
      Security Horn Assembly*1 Sounds a warning on a 0.4 second cycle (approximately)
      Theft Warning Siren Assembly*2 Sounds
      Door Lock Motors Lock
      Warning Time Approximately 27.5 seconds

      • *1: Models with security horn assembly

      • *2: Models with theft warning siren assembly