REAR BUMPER INSTALLATION

PROCEDURE

1. INSTALL REAR BUMPER ASSEMBLY

   1. w/ Rear View Monitor System:

      1. Connect each connector.

      2. Engage the clamp.

   2. w/o Rear View Monitor System:

      1. Connect each connector.

      2. Engage the 2 clamps.

   3. 

      Move the rear bumper assembly into position as shown in the illustration.

   4. Engage the 2 claws to temporarily install the rear bumper assembly.

   5. 

      Engage the 5 claws as shown in the illustration.

      Tip:

      Use the same procedure for the RH side and LH side.

   6. 

      Install the clip (A) and clip (B).

      Tip:

      Use the same procedure for the RH side and LH side.

   7. Install the 2 clips.

   8. Using a T30 "TORX" socket wrench, install the rear bumper assembly with the 2 rear bumper reinforcement stoppers.

2. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH

   Click hereClick here

3. INSTALL REAR COMBINATION LIGHT ASSEMBLY RH

   Tip:

   Use the same procedure as for the LH side.