METER / GAUGE SYSTEM

Multi-information Display (Models with Optitron Type Combination Meter Assembly)

1. Display Function Flow

   
   

   • The multi-information display can be switched as shown in the flowchart below:

     

     (1)	Conditions are not met.
     (2)	Conditions are met.
     (3)	If there are multiple display requests, items will be displayed in sequence.
     (4)	Item or display is selected by operating the steering pad switch assembly switch.
     (5)	ODO display is displayed for a certain period of time after the ignition switch is turned off.
     (6)	After ignition switch is turned to ON.

2. Display Tab Operation

   
   

   • The information currently displayed can be switched using the RIGHT/LEFT switch on the steering pad switch assembly.

     

     *A	Models with Navigation System	*B	Models with Navigation System or Display Audio System
     *C	Models with Toyota Safety Sense	-	-
     *1	Steering Pad Switch Assembly	*2	LEFT Switch
     *3	RIGHT Switch	-	-
     *a	Drive Information	*b	Navigation Information
     *c	Audio Information	*d	Driving Support Information
     *e	Warning Message	*f	Settings
     *g	The illustrations shown are examples only. The illustrations may differ from the actual vehicle screen.	-	-
     	RIGHT Switch Operation		LEFT Switch Operation

3. Drive Information

   
   

   • Drive information shows vehicle information such as drivable range and fuel consumption.

   • The drive information can be switched using the UP/DOWN switch on the steering pad switch assembly.

     

     *A	Models with Stop and Start System	*B	Models with Eco Indicator
     *1	Steering Pad Switch Assembly	*2	UP Switch
     *3	DOWN Switch	-	-
     *a	Drive Information 1	*b	Drive Information 2
     *c	Stop and Start System Information	*d	Eco Drive Indicator and Eco Judge
     *e	Eco Wallet	*f	Blank
     *g	The illustrations shown are examples only. The illustrations may differ from the actual vehicle screen.	-	-
     	DOWN Switch Operation		UP Switch Operation

4. Setting Function

   
   

   • The items displayed on the multi-information display can be customized.

   • The items can be selected on the information setting screen.

     Item	Available Setting
     Language	The language displayed on the multi-information display can be selected. English German*1 French*2 Spanish*2 Italian*1 Russian*1 Turkish*1 Thai*3 Portuguese*3 Indonesian*3 Arabic*4
     Unit	The unit displayed on the multi-information display, display audio system or navigation system can be selected. km (km/L) km (L/100 km)
     Eco Drive Indicator Light	The Eco Drive indicator light can be switched on or off. On Off
     TOP Switch Settings	The item that is displayed when the TOP switch is pressed can be selected.
     Drive Information 1	2 items can be selected among the following: Current Fuel Consumption (Bar Display) Current Fuel Consumption (Value Display) Average Fuel Consumption Between Reset Operations Average Fuel Consumption After Engine Start-up Average Fuel Consumption After Refueling Stop and Start System Operation Time (Between Reset Operations and After Engine Start-up)*5 Average Vehicle Speed Between Reset Operations Average Vehicle Speed After Engine Start-up Elapsed Time Between Reset Operations Elapsed Time After Engine Start-up Cruising Range Cruising Range After Engine Start-up Blank
     Drive Information 2	2 items can be selected among the following: Current Fuel Consumption (Bar Display) Current Fuel Consumption (Value Display) Average Fuel Consumption Between Reset Operations Average Fuel Consumption After Engine Start-up Average Fuel Consumption After Refueling Stop and Start System Operation Time (Between Reset Operations and After Engine Start-up)*5 Average Vehicle Speed Between Reset Operations Average Vehicle Speed After Engine Start-up Elapsed Time Between Reset Operations Elapsed Time After Engine Start-up Cruising Range Cruising Range After Engine Start-up Blank
     Interruption Display	The following displays that appear as soon as the set condition is met can be switched on or off. Turn-by-turn Navigation Display*6
     Accent Color	The accent color can be changed: Clear Blue Clear Turquoise Deep Orange Radiant Orange
     Initialization	The setting items can be initialized.

     *1: Models for Europe

     *2: Except models for Australia and G.C.C. Countries

     *3: Except models for Europe, Australia and G.C.C. Countries

     *4: Models for Europe and G.C.C. Countries

     *5: Models with stop and start system

     *6: Models with navigation system

5. Warning Mode Function

   
   

   • When a warning is necessary, the warning display interrupts the display in the multi-information display.

   • The master warning light may illuminate or blink and the buzzer in the combination meter assembly may sound depending on the item displayed on the multi-information display.

     System	Display Message*
     Entry and Start System	Shift to P before exiting vehicle
     	Power turned off to save battery
     	Key not detected Check key location
     	Smart Entry & Start System malfunction See owner's manual
     	Turn off vehicle
     	Key left inside vehicle
     	Depress brake and then touch key to engine switch
     	Depress clutch and then touch key to engine switch
     	Steering wheel lock Press engine switch while turning wheel
     	Key battery low
     	Depress brake and then start engine
     	Depress clutch and then start engine
     	Push and hold engine switch for emergency stop
     	Shift to N and press engine switch to restart
     	Depress clutch and press engine switch to restart
     Cruise Control System	Cruise control malfunction Visit your dealer
     Engine Control System	Low oil pressure Stop in a safe place See owner's manual
     	Water accumulation in fuel filter See owner's manual
     	Engine oil level low Add or replace
     	Oil maintenance required soon
     	Oil maintenance required
     	Resetting oil maintenance data
     	Resetting of oil maintenance data incomplete
     	Resetting of oil maintenance data complete
     	T-BELT maintenance required
     	Resetting T-BELT maintenance data
     	T-BELT maintenance mileage ****** km
     	Check Engine Reduced engine power Visit your dealer
     	Check Engine Visit your dealer
     	Reduced engine power Visit your dealer
     	Engine maintenance required Visit your dealer
     	Replace fuel filter
     	Symbol Mark Graphic Display (Charge Warning)
     Transmission Control System	Transmission fluid temp high See owner's manual
     	Transmission system malfunction Visit your dealer
     Brake Override System	Brake override malfunction Visit your dealer
     	Accelerator and brake pedals depressed simultaneously
     Wiper and Washer System	Windshield washer fluid low
     Traction Control System	TRC turned off
     4WD Control System	2WD-4WD mode change malfunction visit your dealer
     	Differential oil temp high Cooling time required
     	Differential oil temp high Shift to 2WD mode Cooling time required
     Automatic Headlight Level Control System	Headlight system malfunction Visit your dealer
     iMT System	iMT system malfunction Visit your dealer
     Stop and Start System	Stop & Start system malfunction Visit your dealer
     	Longer idle stop time Low cooling/heating output
     	Intermediate idle stop time Balanced cooling/heating output
     	Shift to neutral position and depress clutch pedal
     Lane Departure Alert System	LDA unavailable Below approx 50km/h
     	LDA unavailable Below approx 32 MPH
     	LDA unavailable at current speed
     	Adjusting LDA camera
     	LDA malfunction Visit your dealer
     	LDA unavailable
     	Vehicle swerving detected Break suggested
     	Repeated lane departures Take a break
     Road Sign Assist System	Check RSA system
     Pre-collision Safety System	BRAKE!
     	Pre-Collision Safety Malfunction Visit Your Dealer
     	Pre-Collision Safety Unavailable
     	VSC Turned Off Pre-Collision Brake System Unavailable
     	Forward Camera System Unavailable
     	Forward Camera System Unavailable Clean Windshield
     	Pre-Collision Safety Unavailable Clean Sensor
     	Adjusting front radar beam
     	Adjusting front radar beam Error
     	Adjusting front radar beam Along vertical axis
     	Adjusting front radar beam Along horizontal axis

     *: The warning message differs by vehicle specification.