IGNITION COIL AND SPARK PLUG INSTALLATION

CAUTION / NOTICE / HINT

Tip:

Perform "Inspection After Repairs" after replacing the ignition coil assembly or the spark plug.

w/ EGR System:
Click here
w/o EGR System:
Click here
w/ Canister Pump Module:
Click here

PROCEDURE

INSTALL SPARK PLUG
Tip:
Perform "Inspection After Repairs" after replacing the spark plug.
- w/ EGR System:
  Click here
- w/o EGR System:
  Click here
- w/ Canister Pump Module:
  Click here
1. Using a 16 mm spark plug wrench, install the 4 spark plugs.
  
  25 N*m
  
  255 kgf*cm
  
  18 ft.*lbf
  
  Note:
  Replace with a new part if it is dropped or if it receives a strong impact.
INSTALL IGNITION COIL ASSEMBLY
Tip:
Perform "Inspection After Repairs" after replacing the ignition coil assembly.
- w/ EGR System:
  Click here
- w/o EGR System:
  Click here
- w/ Canister Pump Module:
  Click here
1. Install the 4 ignition coil assemblies with the 4 bolts.
  
  10 N*m
  
  102 kgf*cm
  
  7 ft.*lbf
  
  Note:
  Replace with a new part if it is dropped or if it receives a strong impact.
2. Connect the 4 ignition coil assembly connectors.
INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

Click here