VACUUM SENSOR ASSEMBLY INSTALLATION

PROCEDURE

  1. INSTALL VACUUM SENSOR GROMMET

    1. Install the new vacuum sensor grommet to the brake booster assembly.

  2. INSTALL VACUUM SENSOR ASSEMBLY

    1. A292998C01

      *A

      for LHD

      *B

      for RHD

      *a

      Approximately 35°

      *b

      Approximately 45°

      Install the vacuum sensor assembly to the brake booster assembly so that the vacuum sensor assembly is angled as shown in the illustration.

    2. Connect the vacuum sensor assembly connector to the vacuum sensor assembly.

  3. INSTALL BRAKE MASTER CYLINDER SUB-ASSEMBLY (for LHD)

    Click hereClick hereClick hereClick hereClick hereClick here

  4. INSTALL BRAKE MASTER CYLINDER SUB-ASSEMBLY (for RHD)

    Click hereClick hereClick hereClick here