OIL PRESSURE SENSOR REMOVAL

PROCEDURE


  1. REMOVE ENGINE UNDER COVER


    1. A004T7B

      Remove the 8 clips and fold back the engine under cover.

      Tech Tips

      It is not necessary to fully remove the engine under cover. Partially remove it so that the oil can be replaced in a later step.

  2. DRAIN ENGINE OIL

    Click here

  3. REMOVE NO. 1 ENGINE COVER

    Click here

  4. REMOVE RADIATOR SUPPORT OPENING COVER

    Click here

  5. REMOVE OIL PRESSURE SENDER GAUGE ASSEMBLY


    1. Disconnect the oil pressure sender gauge connector.

    2. A004S4R

      Using a 27 mm deep socket wrench, remove the oil pressure sender gauge.