METER / GAUGE SYSTEM TERMINALS OF ECU


  1. COMBINATION METER ASSEMBLY

    B006BRWE08

    1. Disconnect the combination meter assembly connectors.

    2. Measure the voltage and resistance according to the value(s) in the table below.

      Terminal No. Wiring Color Terminal Description Condition Specified Condition
      G34-21 (IG+) - Body ground G - Body ground IG power supply Engine switch off Below 1 V
      Engine switch on (IG) 10.5 to 16 V
      G34-22 (B) - Body ground LA-B - Body ground +B power supply Engine switch off 11 to 14 V
      G35-1 (B) - Body ground LA-P - Body ground +B power supply Engine switch off 11 to 14 V
      G34-39 (ILL-) - Body ground B - Body ground Illumination signal Light control switch off Below 1 V
      Light control switch in tail or head position 11 to 14 V
      G34-38 (IL2-) - Body ground LA-BE - Body ground Illumination signal Light control switch off Below 1 V
      Light control switch in tail or head position 11 to 14 V
      G34-40 (EP) - Body ground LA - Body ground Ground Always Below 1 Ω

      If the result is not as specified, there may be a malfunction in the wire harness.

    3. Reconnect the combination meter assembly connectors.

    4. Measure the voltage and resistance according to the value(s) in the table below.

      Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
      G34-14 (RLSB) - Body ground LG - Body ground Rear LH seat belt warning light signal Rear LH seat belt fastened within 30 seconds of opening door with Engine switch on (IG) 11 to 14 V
      Rear LH seat belt unfastened within 30 seconds of opening door with Engine switch on (IG) Below 1 V
      G34-12 (RRSB) - Body ground SB - Body ground Rear RH seat belt warning light signal Rear RH seat belt fastened within 30 seconds of opening door with Engine switch on (IG) 11 to 14 V
      Rear RH seat belt unfastened within 30 seconds of opening door with Engine switch on (IG) Below 1 V
      G34-13 (RCSB) - Body ground P - Body ground Rear center seat belt warning light signal Rear center seat belt fastened within 30 seconds of opening door with Engine switch on (IG) 11 to 14 V
      Rear center seat belt unfastened within 30 seconds of opening door with Engine switch on (IG) Below 1 V
      G35-6 (INT) - Body ground W - Body ground Tire pressure warning light signal Engine switch on (IG), tire pressure warning light off Below 1 V
      Engine switch on (IG), tire pressure warning light on 11 to 14 V
      G34-20 (SI) - Body ground LG - Body ground Speed signal for other system (Input) Engine switch on (IG), wheel being rotated Pulse generation (See waveform 1)
      G34-19 (+S) - Body ground L - Body ground Speed signal for other system (Output) Engine switch on (IG), wheel being rotated Pulse generation (See waveform 1)
      G34-34 (FV) - Body ground B - Body ground Fuel sender gauge (Power source) Engine switch on (IG) 4.5 to 5.5 V
      G34-37 (FV) - Body ground R - Body ground Fuel sender gauge (Power source) Engine switch on (IG) 4.5 to 5.5 V
      G34-33 (FR) - G34-32 (FE) G - R Fuel level signal Engine switch on (IG) fuel level full Below 1 V
      Engine switch on (IG) fuel level low (fuel level warning light on) 4.5 to 5.5 V
      G34-36 (FR) - G34-35 (FE&B) L - BE Fuel level signal Engine switch on (IG) fuel level full Below 1 V
      Engine switch on (IG) fuel level low (fuel level warning light on) 4.5 to 5.5 V
      G34-32 (FE) - Body ground R - Body ground Fuel sender gauge (Ground) Always Below 1 Ω
      G34-35 (FE&B) - Body ground BE - Body ground Fuel sender gauge (Ground) Always Below 1 Ω
      G34-16 (WLVL) - Body ground V - Body ground Washer fluid level signal Engine switch on (IG) washer fluid level not low 11 to 14 V
      Engine switch on (IG) washer fluid level low Below 1 V
      G34-31 (ES) - Body ground LA - Body ground Ground Always Below 1 Ω
      G34-5 (EPB) - Body ground P - Body ground Electric parking brake signal Engine switch on (IG), parking brake switch is off 11 to 14 V
      Engine switch on (IG), parking brake switch is on Below 1 V
      G34-24 (RLMT) - Body ground L - Body ground Rear LH seat belt warning light output signal Engine switch on (IG), rear seat belt warning light (LH) off 11 to 14 V
      Engine switch on (IG), rear seat belt warning light (LH) on Below 1 V
      G34-27 (RCMT) - Body ground LG - Body ground Rear center seat belt warning light output signal Engine switch on (IG), rear seat belt warning light (center) off 11 to 14 V
      Engine switch on (IG), rear seat belt warning light (center) on Below 1 V
      G34-28 (RRMT) - Body ground W - Body ground Rear RH seat belt warning light output signal Engine switch on (IG), rear seat belt warning light (RH) off 11 to 14 V
      Engine switch on (IG), rear seat belt warning light (RH) on Below 1 V
      G34-30 (CANL) W CAN communication line - -
      G34-29 (CANH) Y CAN communication line - -
      G34-7 (TX-) W Local bus communication line - -
      G34-8 (TX+) B Local bus communication line - -
      G34-3 (MSTI) - Body ground B - Body ground Steering pad switch signal Engine switch on (IG), up, down, right and left switches on steering pad switch assembly not pushed 4.3 to 5.2 V
      Engine switch on (IG), left switch on steering pad switch pushed Below 0.6 V
      Engine switch on (IG), up switch on steering pad switch pushed 1.0 to 2.2 V
      Engine switch on (IG), down switch on steering pad switch pushed 2.3 to 3.4 V
      Engine switch on (IG), right switch on steering pad switch pushed 3.4 to 4.5 V
      G34-2 (MSM+) - Body ground LG - Body ground Steering pad switch signal Engine switch on (IG), enter, trip and back switches on steering pad switch not pushed 4.3 to 5.2 V
      Engine switch on (IG), enter switch on steering pad switch pushed Below 0.6 V
      Engine switch on (IG), trip switch on steering pad switch pushed 1.0 to 2.2 V
      Engine switch on (IG), back switch on steering pad switch pushed 2.3 to 3.4 V
      G34-25 (TR) - Body ground Y - Body ground Light control rheostat switch signal Engine switch on (IG), up switch and down switch of trip switch not pushed 4 to 6 V
      Engine switch on (IG), up switch or down switch of trip switch pushed Below 1 V
      G34-26 (SW3) - Body ground W - Body ground Ground for trip switch Always Below 1 Ω
      G34-4 (ODO) - Body ground W - Body ground ODO/TRIP switch signal Engine switch on (IG), ODO/TRIP switch not pushed 4 to 6 V
      Engine switch on (IG), ODO/TRIP switch pushed Below 1 V
      G34-11 (LST1) - Body ground GR - Body ground Fuel lid operation signal "Please Wait Now Opening" displayed on multi-information display Pulse generation (See waveform 2)
      "Close Fuel Lid" displayed on multi-information display Pulse generation (See waveform 3)
      "Refuel Ready" displayed on multi-information display Pulse generation (See waveform 4)
      Engine switch on (IG), "OFF" displayed on multi-information display 11 to 14 V
      G34-9 (S) - Body ground BE - Body ground Oil pressure signal Engine started 11 to 14 V
      Engine not started Below 1 V
      G34-10 (PIND) - Body ground L - Body ground Pad wear indicator light signal Engine switch on (IG), pad wear indicator light off Below 1 V
      Engine switch on (IG), pad wear indicator light on 11 to 14 V
      G34-15 (OILW) - Body ground SB - Body ground Engine oil level signal Engine switch on (IG), engine oil level not low 11 to 14 V
      Engine switch on (IG), engine oil level low Below 1 V
      G35-2 (HZSW) - Body ground P - Body ground Hazard warning signal switch signal (Output) Hazard warning signal switch off 11 to 14 V
      Hazard warning signal switch on Below 1 V
      G35-12 (HAZM) - Body ground B - Body ground Hazard warning signal switch signal (Output) Engine switch on (IG), hazard warning signal switch not pressed Below 1 V
      Engine switch on (IG), hazard warning signal switch pressed 11 to 14 V ←→ Below 1 V
      G35-5 (TRNR) - Body ground LA-SB - Body ground Rear turn signal light RH signal Engine switch on (IG), RH turn indicator light off Below 1 V
      Engine switch on (IG), RH turn indicator light blinking 11 to 14 V ←→ Below 1 V
      G35-11 (TRNL) - Body ground LA-Y - Body ground Rear turn signal light LH signal Engine switch on (IG), LH turn indicator light off Below 1 V
      Engine switch on (IG), LH turn indicator light blinking 11 to 14 V ←→ Below 1 V
      G35-7 (LR) - Body ground LA-Y - Body ground Front/Side turn signal light RH signal Engine switch on (IG), RH turn indicator light off Below 1 V
      Engine switch on (IG), RH turn indicator light blinking 11 to 14 V ←→ Below 1 V
      G35-13 (LL) - Body ground LA-SB - Body ground Front/Side turn signal light LH signal Engine switch on (IG), LH turn indicator light off Below 1 V
      Engine switch on (IG), LH turn indicator light blinking 11 to 14 V ←→ Below 1 V

      • *1: w/ Washer Level Warning

      • *2: for Radio and Display Receiver Type

      If the result is not as specified, the combination meter assembly may be malfunctioning.


      1. B006F0HE08
        *a 5 V/DIV.
        *b 20 ms./DIV.

        Waveform 1 (Reference):

        Item Condition
        Tool setting 5 V/DIV., 20 ms./DIV.
        Vehicle condition Engine switch on (IG) wheel being rotated

        Tech Tips

        When the system is functioning normally, one wheel revolution generates 4 pulses. As the vehicle speed increases, the width indicated by (A) in the illustration narrows.

      2. B006G9NE05
        *a 5 V/DIV.
        *b 20 ms./DIV.

        Waveform 2:

        Item Condition
        Tester Range 5 V/DIV., 20 ms./DIV.
        Condition "Please Wait Now Opening" displayed on multi-information display
      3. B006GMKE05
        *a 5 V/DIV.
        *b 20 ms./DIV.

        Waveform 3:

        Item Condition
        Tester Range 5 V/DIV., 20 ms./DIV.
        Condition "Close Fuel Lid" displayed on multi-information display
      4. B0069VXE01
        *a 5 V/DIV.
        *b 20 ms./DIV.

        Waveform 4:

        Item Condition
        Tester Range 5 V/DIV., 20 ms./DIV.
        Condition "Refuel Ready" displayed on multi-information display