REAR BUMPER REASSEMBLY

PROCEDURE

  1. INSTALL REAR BUMPER REINFORCEMENT SUB-ASSEMBLY

    B371099

    1. Install the rear bumper reinforcement sub-assembly with the 4 bolts and 2 nuts.

      Bolt

      19.5 N*m

      199 kgf*cm

      14 ft.*lbf

      Nut

      17 N*m

      173 kgf*cm

      13 ft.*lbf

    2. Engage the clamp.

  2. INSTALL REAR BUMPER SIDE SEAL LH

    1. B371098

      Install the rear bumper side seal LH with the 2 clips.

  3. INSTALL REAR BUMPER SIDE SEAL RH

    Tip:

    Use the same procedure as for the LH side.

  4. INSTALL REAR BUMPER SIDE RETAINER LH

    1. B371097

      Engage the 2 claws.

    2. Install the rear bumper side retainer LH with the screw.

  5. INSTALL REAR BUMPER SIDE RETAINER RH

    Tip:

    Use the same procedure as for the LH side.

  6. INSTALL REAR BUMPER EXTENSION

    1. Engage the 22 claws to install the rear bumper extension.

      B371096

  7. INSTALL REFLEX REFLECTOR ASSEMBLY LH

    1. B371095

      Engage the guide.

    2. Install the reflex reflector assembly LH with the screw.

  8. INSTALL REFLEX REFLECTOR ASSEMBLY RH

    Tip:

    Use the same procedure as for the LH side.

  9. INSTALL LICENSE PLATE LIGHT ASSEMBLY (for LH Side)

    Click here

  10. INSTALL LICENSE PLATE LIGHT ASSEMBLY (for RH Side)

    Tip:

    Use the same procedure as for the LH side.

  11. INSTALL REAR TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)

    Click here