INTEGRATION RELAY ON-VEHICLE INSPECTION


  1. INSPECT INTEGRATION NO.1 RELAY


    1. A01E0X1E01

      Using a screwdriver, detach the 2 claws and disconnect the integration relay from the engine room junction block.

      Tech Tips

      Tape the screwdriver tip before use.


      1. A01DZ2WE12

        Measure the voltage of the MAIN relay.

        Standard resistance
        Tester Connection Condition Specified Condition
        IJ-4 - Body ground Ignition switch ON 10 to 14 V

        If the result is not as specified, replace the integration relay.