PRE-CRASH SAFETY SYSTEM, Diagnostic DTC:B2060

DTC Code DTC Name
B2060 ABS Malfunction

DESCRIPTION

This DTC is stored when a malfunction in the brake system is detected. This circuit consists of the skid control ECU and seat belt control ECU. Signals are sent from the skid control ECU to the seat belt control ECU through the CAN communication line.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

DTC Output from

B2060

ABS Malfunction

While the initial check is running, the engine switch on (IG) and the pre-crash safety system is operating, a brake system malfunction signal is received from the skid control ECU for 1 second.

  • Vehicle stability control system

  • Seat belt control ECU

Seat Belt Control ECU (Pre-Crash)

PROCEDURE

  1. CHECK FOR DTC (VEHICLE STABILITY CONTROL SYSTEM)

    1. Check for DTCs.

      Click hereClick here

      Body Electrical > Pre-Crash > Trouble Codes

      OK

      Vehicle stability control system DTCs are not output.

      Result

      Result

      OK

      NG
    NG

    GO TO VEHICLE STABILITY CONTROL SYSTEM

    Click hereClick here

    OK

  2. CHECK FOR DTC

    1. Clear the DTCs.

      Click here

      Body Electrical > Pre-Crash > Clear DTCs

    2. Check for DTCs.

      Click here

      Body Electrical > Pre-Crash > Trouble Codes

      OK

      DTC B2060 is not output.

      Result

      Result

      OK

      NG
    OK

    USE SIMULATION METHOD TO CHECK

    Click here

    NG

    REPLACE SEAT BELT CONTROL ECU

    Click here