FRONT CRANKSHAFT OIL SEAL INSTALLATION

PROCEDURE

  1. INSTALL TIMING CHAIN COVER OIL SEAL

    1. Apply MP grease to the lip of a new oil seal.

      Note:

      • Do not allow foreign matter to contact the lip of the oil seal.

      • Do not allow MP grease to contact the dust seal.

    2. A195808E01

      Using SST and a hammer, tap in the oil seal until its surface is flush with the timing chain cover edge.

      09223-22010

      Note:

      • Keep the lip of the oil seal free from foreign matter.

      • Do not tap in the oil seal at an angle.

  2. INSTALL CRANKSHAFT PULLEY

    Click hereClick hereClick here

  3. INSTALL FRONT SUSPENSION MEMBER REINFORCEMENT RH

    Click hereClick hereClick here

  4. INSTALL FAN AND GENERATOR V BELT

    Click here

  5. CONNECT RADIATOR RESERVOIR ASSEMBLY

    Click here

  6. INSTALL REAR ENGINE UNDER COVER RH

    Click hereClick hereClick here

  7. INSTALL NO. 1 ENGINE UNDER COVER

    Click hereClick hereClick here