QUARTER WHEEL HOUSING OUTER PANEL ASSEMBLY REPLACEMENT

A01O6US


  1. REMOVAL

    Symbol Meaning
    B008JPV Remove Weld Points
    B008JQF Remove Weld Points
    B008JQI Remove Weld Points
    B008JQJ Cut and Join Location

    1. After removing the A and B, remove the C.

      A01O6S8C01
      *A LH - -
      *a 50 mm (1.97 in.) - -

    2. Bend in the same way as A.

      A01O6TGC01
      *A LH - -

    3. Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

      Tech Tips

      In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.

      A01O6R7C01
      *A LH - -
      A01O6LP Adhesive - -

    4. After removing the A and B, remove the C.

      A01O6MKC01
      *A RH - -
      *a 50 mm (1.97 in.) - -

    5. Bend in the same way as A.

      A01O6RVC01
      *A RH - -

    6. Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

      Tech Tips

      In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.

      A01O6WHC01
      *A RH - -
      A01O6LP Adhesive - -

  2. INSTALLATION

    Symbol Meaning
    A01O6QP Spot Weld
    B008JQK Plug Weld
    B008JQN Plug Weld
    B008JQT Plug Weld
    B008JQM Butt Weld
    B008JQO Assembly Mark

    1. Remove A and B from a new quarter wheel house panel outer.

      A01O6OCC01
      *A LH - -
      *1 QUARTER WHEEL HOUSE PANEL OUTER - -
      *a 50 mm - -

    2. Apply adhesive (3MTMAutomixTMPanel Bonding Adhesive #8115).

      Tech Tips


      • Apply a light coat of adhesive around the plug welding points.

      • Apply enough adhesive to the panels.

      A01O6R7C01
      *A LH - -
      A01O6LP Adhesive - -

    3. For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.

      A01O6UEC01
      *A LH - -

    4. After welding the A to the vehicle side, install the B and C.

      A01O6URC01
      *A LH - -

    5. Remove A and B from a new quarter wheel house panel outer.

      A01O6N1C01
      *A RH - -
      *1 QUARTER WHEEL HOUSE PANEL OUTER - -
      *a 50 mm - -

    6. Apply adhesive (3MTMAutomixTMPanel Bonding Adhesive #8115).

      Tech Tips


      • Apply a light coat of adhesive around the plug welding points.

      • Apply enough adhesive to the panels.

      A01O6WHC01
      *A RH - -
      A01O6LP Adhesive - -

    7. For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.

      A01O6KLC01
      *A RH - -

    8. After welding the A to the vehicle side, install the B and C.

      A01O6WKC01
      *A RH - -

    9. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

    10. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.