FORWARD RECOGNITION CAMERA SYSTEM, Diagnostic DTC:U0100,U0101,U0123,U0129,U0142,U0235 and U1104
| DTC Code | DTC Name |
|---|---|
| U0100 | Lost Communication with ECM / PCM "A" |
| U0101 | Lost Communication With TCM |
| U0123 | Lost Communication with Yaw Rate Sensor Module |
| U0129 | Lost Communication with Brake System Control Module |
| U0142 | Lost Communication with Body Control Module "B" |
| U0235 | Lost Communication with Cruise Control Front Distance Range Sensor |
| U1104 | Lost Communication with Driving Support ECU |
DESCRIPTION
These DTCs are output when a communication malfunction occurs between the sensors and ECUs.
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
|---|---|---|---|
U0100 |
Lost Communication with ECM / PCM "A" |
While the vehicle is being driven at 1 km/h or 1 mph or more, a communication error between the ECM and the forward recognition camera is detected for approximately 5 seconds or more. |
|
U0101 |
Lost Communication With TCM |
While the vehicle is being driven at 1 km/h or 1 mph or more, a communication error between the ECM (TCM) and the forward recognition camera is detected for approximately 5 seconds or more. |
|
U0123 |
Lost Communication with Yaw Rate Sensor Module |
While the vehicle is being driven at 1 km/h or 1 mph or more, a communication error between the yaw rate sensor and the forward recognition camera is detected for approximately 5 seconds or more. |
|
U0129 |
Lost Communication with Brake System Control Module |
While the ignition switch is ON, a communication error between the skid control ECU (brake actuator assembly) and the forward recognition camera is detected for approximately 5 seconds or more. |
|
U0142 |
Lost Communication with Body Control Module "B" |
2 seconds after the engine switch is turned on (IG), a communication error between the main body ECU (multiplex network body ECU) and the forward recognition camera is detected for approximately 5 seconds or more. |
|
U0235 |
Lost Communication with Cruise Control Front Distance Range Sensor |
2 seconds after the engine switch is turned on (IG), a communication error between the millimeter wave radar sensor assembly and the forward recognition camera is detected for approximately 5 seconds. |
|
U1104 |
Lost Communication with Driving Support ECU |
2 seconds after the engine switch is turned on (IG), a communication error between the driving support ECU assembly and the forward recognition camera is detected for approximately 5 seconds. |
|
PROCEDURE
CHECK FOR DTCs
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Chassis / Front Recognition Camera / Trouble Codes.
Clear the DTCs.
Chassis > Front Recognition Camera > Clear DTCs
Make sure that the DTC detection conditions are met.
Tip:If the detection conditions are not met, the system cannot detect the malfunction.
Enter the following menus: Chassis / Front Recognition Camera / Trouble Codes.
Check the DTCs.
Chassis > Front Recognition Camera > Trouble Codes
Result
Result
Proceed to
DTC U0100, U0101, U0123, U0129, U0142, U0155, U0235 and U1104 are not output
A
DTC U0100, U0101, U0123, U0129, U0142, U0155, U0235 or U1104 is output
B
B GO TO CAN COMMUNICATION SYSTEM
for LHD with Central Gateway ECU:Click here
for RHD with Central Gateway ECU:Click here