NAME PLATE INSTALLATION

PROCEDURE

  1. INSTALL BACK DOOR NAME PLATE

    Tip:

    When installing the back door name plate, heat the back door panel and back door name plate using a heat light.

    Standard

    Item

    Temperature

    Back Door Panel

    40 to 60°C (104 to 140°F)

    Back Door Name Plate

    20 to 30°C (68 to 86°F)
    Note:

    Do not heat the back door panel or back door name plate excessively.

    1. Clean the back door panel surface.

      1. Using a heat light, heat the back door panel surface.

      2. Remove the double-sided tape from the back door panel.

      3. Wipe off any tape adhesive residue with cleaner.

    2. B433649C01

      *a

      Reference Values

      *b

      Horizontal Line

      Install a new back door name plate.

      1. Using a heat light, heat the back door panel and a new back door name plate.

      2. Remove the peeling paper from the face of the back door name plate.

        Tip:

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Install the back door name plate in the position shown in the illustration.

        Tip:

        Press the back door name plate firmly to install it.

        Standard

        Area

        Specified Condition

        A

        170.2 mm (6.70 in.)

        B

        149.5 mm (5.89 in.)

        C

        332.0 mm (13.1 in.)

        D

        203.0 mm (7.99 in.)

  2. INSTALL NO. 1 BACK DOOR EMBLEM

    Tip:

    When installing the No. 1 back door emblem, heat the back door panel and No. 1 back door emblem using a heat light.

    Standard

    Item

    Temperature

    Back Door Panel

    40 to 60°C (104 to 140°F)

    No. 1 Back Door Emblem

    20 to 30°C (68 to 86°F)
    Note:

    Do not heat the back door panel or No. 1 back door emblem excessively.

    1. Clean the back door panel surface.

      1. Using a heat light, heat the back door panel surface.

      2. Remove the double-sided tape from the back door panel.

      3. Wipe off any tape adhesive residue with cleaner.

    2. B433650C01

      *a

      Reference Values

      *b

      Horizontal Line

      Install a new No. 1 back door emblem.

      1. Using a heat light, heat the back door panel and a new No. 1 back door emblem.

      2. Remove the peeling paper from the face of the No. 1 back door emblem.

        Tip:

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 1 back door emblem in the position shown in the illustration.

        Tip:

        Press the No. 1 back door emblem firmly to install it.

        Standard

        Area

        Specified Condition

        A

        149.2 mm (5.87 in.)

        B

        146.8 mm (5.78 in.)

        C

        341.2 mm (13.4 in.)

        D

        188.2 mm (7.41 in.)

  3. INSTALL NO. 4 BACK DOOR NAME PLATE

    Tip:

    When installing the No. 4 back door name plate, heat the back door panel and No. 4 back door name plate using a heat light.

    Standard

    Item

    Temperature

    Back Door Panel

    40 to 60°C (104 to 140°F)

    No. 4 Back Door Name Plate

    20 to 30°C (68 to 86°F)
    Note:

    Do not heat the back door panel or No. 4 back door name plate excessively.

    1. Clean the back door panel surface.

      1. Using a heat light, heat the back door panel surface.

      2. Remove the double-sided tape from the back door panel.

      3. Wipe off any tape adhesive residue with cleaner.

    2. B426459C02

      *a

      Reference Values

      *b

      Horizontal Line

      for Type A:

      Install a new No. 4 back door name plate.

      1. Using a heat light, heat the back door panel and a new No. 4 back door name plate.

      2. Remove the peeling paper from the face of the No. 4 back door name plate.

        Tip:

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 4 back door name plate in the position shown in the illustration.

        Tip:

        Press the No. 4 back door name plate firmly to install it.

        Standard

        Area

        Specified Condition

        A

        122.1 mm (4.81 in.)

        B

        122.9 mm (4.84 in.)

        C

        299.2 mm (11.8 in.)

        D

        211.2 mm (8.31 in.)
    3. B433652C01

      *a

      Reference Values

      *b

      Horizontal Line

      for Type B:

      Install a new No. 4 back door name plate.

      1. Using a heat light, heat the back door panel and a new No. 4 back door name plate.

      2. Remove the peeling paper from the face of the No. 4 back door name plate.

        Tip:

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 4 back door name plate in the position shown in the illustration.

        Tip:

        Press the No. 4 back door name plate firmly to install it.

        Standard

        Area

        Specified Condition

        A

        122.7 mm (4.83 in.)

        B

        123.0 mm (4.84 in.)

        C

        279.7 mm (11.0 in.)

        D

        211.5 mm (8.33 in.)