FRONT CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE

  1. REMOVE FAN AND GENERATOR V BELT

    Click here

  2. REMOVE CRANKSHAFT PULLEY

    1. A273394N01

      Using SST, hold the crankshaft pulley and loosen the pulley bolt until 2 or 3 threads are screwed into the crankshaft.

      09213-58014

      91551-80840

      09330-00021

    2. A273395N01

      Using SST and the pulley bolt, remove the crankshaft pulley and pulley bolt.

      09950-50013

      09951-05010

      09952-05010

      09953-05020

      09954-05021

  3. REMOVE FRONT CRANKSHAFT OIL SEAL

    1. A202325C01

      *1

      Protective Tape

      Using a screwdriver, pry out the front crankshaft oil seal.

      Note:

      • Do not damage the surface of the front crankshaft oil seal press fit hole or the crankshaft.

      • After removing the front crankshaft oil seal, check the crankshaft for damage. If damaged, smooth the surface with 400-grit sandpaper.

      Tip:

      Tape the screwdriver tip before use.