CAMSHAFT POSITION SENSOR REMOVAL

PROCEDURE

  1. REMOVE NO. 1 ENGINE COVER

    Click hereClick hereClick hereClick here

  2. REMOVE CAMSHAFT POSITION SENSOR

    1. for Exhaust Side

      1. A200217

        Disconnect the camshaft position sensor connector.

      2. A200218

        Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.

        Note:

        If a component has been dropped or subjected to a strong impact, replace it.

    2. for Intake Side

      1. A200219

        Disconnect the camshaft position sensor connector.

      2. A200220

        Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.

        Note:

        If a component has been dropped or subjected to a strong impact, replace it.