COOLING FAN MOTOR ON-VEHICLE INSPECTION

PROCEDURE

  1. INSPECT COOLING FAN MOTOR

    A211609E02

    1. Detach the clamp and disconnect the wire harness.

    2. Disconnect the cooling fan motor connector.

    3. Connect the 400 A probe of an ammeter to the (+) wire of the cooling fan motor.

    4. Check that the motor turns smoothly when the battery is connected to the fan motor connector.

    5. Measure the current while the motor is turning.

      Standard Current

      Item

      Condition

      Specified Condition

      Indication Mark 43

      Indication Mark 44

      Indication Mark T5

      Indication Mark T6

      20°C (68°F)

      7.4 to 10.9 A

      Indication Mark T7

      Indication Mark T8

      Indication Mark T0

      20°C (68°F)

      11.2 to 15.2 A
      Table 1. Text in Illustration

      *1

      Component without harness connected

      (Cooling fan motor)

      *2

      Indication Mark
      Tip:

      Refer to the illustration for the indication mark location.

      If the result is not as specified, replace the cooling fan motor.