LUMBAR SWITCH INSPECTION

PROCEDURE


  1. INSPECT POWER SEAT SWITCH ASSEMBLY


    1. A005ETDE01
      Text in Illustration
      *A for LHD
      *B for RHD
      *a Hold
      *b Release
      *c

      Component without harness connected

      (Power Seat Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 4 Hold Below 1 Ω
      1 - 2
      4 - 5 Off
      1 - 2
      4 - 5 Release
      1 - 3

      If the result is not as specified, replace the power seat switch assembly.