COMPRESSOR(for 1NR-FE) REMOVAL

PROCEDURE

1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM (for HFC-134a(R134a))

   Click here

2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM (for HFO-1234yf(R1234yf))

   Click hereClick here

3. REMOVE V-RIBBED BELT

   Click here

4. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY

   1. 

      Remove the bolt and disconnect the discharge hose sub-assembly from the compressor assembly with pulley.

   2. Remove the O-ring from the discharge hose sub-assembly.

      Note:

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

5. DISCONNECT SUCTION HOSE SUB-ASSEMBLY

   1. 

      Remove the bolt and disconnect the suction hose sub-assembly from the compressor assembly with pulley.

   2. Remove the O-ring from the suction hose sub-assembly.

      Note:

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

6. REMOVE COMPRESSOR ASSEMBLY WITH PULLEY

   1. 

      Disconnect the connector.

   2. 

      	Bolt
      	Nut

      Remove the 2 bolts and 2 nuts.

   3. 

      Using an E8 "TORX" socket, remove the 2 stud bolts.

   4. Remove the compressor assembly with pulley.