INNER REAR VIEW MIRROR(w/ Pre-collision System) INSPECTION

PROCEDURE

  1. INSPECT INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror)

    1. Check operation of the electrochromic mirror.

      B440652E02
      Table 1. Text in Illustration

      *1

      Black Colored Tape

      *2

      Forward Sensor

      *3

      Battery

      -

      -

      *a

      Component without harness connected (Inner Rear View Mirror Assembly)

      *b

      Bright

      *c

      Dark

      -

      -

      1. Connect the battery positive (+) lead to terminal 4 (IG) and the negative (-) lead to terminal 1 (E).

      2. Press the AUTO switch.

      3. Attach black colored tape to the forward sensor to prevent it from sensing light.

      4. Shine an electric light on the mirror. Check that the mirror surface changes from bright to dark.

        Tip:

        When the environment is very bright, the antiglare operation may occur immediately after the tape is applied.

        If the result is not as specified, replace the inner rear view mirror.