ENGINE OIL TEMPERATURE SENSOR INSTALLATION

PROCEDURE


  1. INSTALL ENGINE OIL TEMPERATURE SENSOR


    1. Install a new gasket onto the engine oil temperature sensor.

    2. Using a 19 mm deep socket wrench, install the engine oil temperature sensor to the timing chain cover sub-assembly.

      Torque:
      19.6 N*m  { 200 kgf*cm, 14 ft.*lbf }

      Note

      If the engine oil temperature sensor has been struck or dropped, replace it.

    3. Connect the engine oil temperature sensor connector.

  2. INSPECT FOR ENGINE OIL LEAK

    Click here

  3. INSTALL REAR ENGINE UNDER COVER RH

    Click here