REAR LIGHT ASSEMBLY(except Sedan) REASSEMBLY

PROCEDURE

  1. INSTALL REAR LIGHT LENS AND BODY

  2. INSTALL REAR LIGHT SOCKET AND WIRE

    1. E322064N01

      Engage the 2 clamps to install the rear light socket and wire.

      Note:

      Make sure there is no slack in the wire harness between the (A) to (B).

    2. Connect each connector.

  3. INSTALL BACK-UP LIGHT BULB

    1. Install the back-up light bulb to the rear light socket and wire.

    2. E314533

      Turn the rear light socket and wire with the back-up light bulb in the direction indicated by the arrow in the illustration to connect them as a unit.

  4. INSTALL REAR LIGHT GASKET

    1. E314531

      Install a new rear light gasket.