FRONT SHOCK ABSORBER (for 4WD and Pre-Runner) DISPOSAL


  1. DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY LH

    Tech Tips

    Use the same procedure for the other front shock absorber.


    1. A01DY1VE02
      Text in Illustration
      *a Approximately 45 mm

      Fully extend the shock absorber piston rod and fix the shock absorber in place at an angle in a vise or similar tool.

    2. Using a drill or similar tool, slowly make a hole approximately 45 mm (1.77 in.) from the top end of the shock absorber and discharge the gas inside of it.

      Note


      • The gas is colorless, odorless and harmless.

      • Since the discharged gas may cause chips to fly off, cover the drill with a cloth when making a hole.