FUEL FILTER(w/o Canister Pump Module) REPLACEMENT

CAUTION / NOTICE / HINT

Note:

Do not try to remove the black nylon tube as it is welded to the fuel suction tube assembly.

Click here

PROCEDURE

  1. REMOVE FUEL SUCTION TUBE ASSEMBLY WITH PUMP

    Click here

  2. REMOVE NO. 1 FUEL SUB-TANK

    Click here

  3. REMOVE NO. 1 FUEL SUCTION SUPPORT

    Click here

  4. REMOVE FUEL PUMP

    Click here

  5. REMOVE FUEL FILTER ASSEMBLY

    1. A195883

      Using a screwdriver with its tip wrapped in protective tape, remove the fuel pressure regulator assembly from the fuel filter assembly.

      Note:

      Slowly pull out the fuel pressure regulator assembly because the O-ring is firmly installed between the fuel pressure regulator assembly and fuel filter assembly.

    2. Remove the 2 O-rings.

  6. INSTALL FUEL FILTER ASSEMBLY

    1. A195884C01

      *1

      New O-Ring

      Apply a light coat of gasoline to 2 new O-rings and install them to the fuel pressure regulator assembly.

    2. Install the fuel pressure regulator assembly to the fuel filter assembly.

  7. INSTALL FUEL PUMP

    Click here

  8. INSTALL NO. 1 FUEL SUCTION SUPPORT

    Click here

  9. INSTALL NO. 1 FUEL SUB-TANK

    Click here

  10. INSTALL FUEL SUCTION TUBE ASSEMBLY WITH PUMP

    Click here