REAR NO. 1 SEAT OUTER BELT ASSEMBLY INSTALLATION
CAUTION / NOTICE / HINT
Use the same procedure for the LH and RH sides.
The procedure listed below is for the LH side.
A bolt without a torque specification is shown in the standard bolt chart (Click here).
PROCEDURE
INSTALL REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH
-
Align the rear No. 1 seat outer belt positioning holes with the claws.
Install the rear No. 1 seat outer belt with the bolt.
42 N*m
428 kgf*cm
31 ft.*lbf
-
Install the rear No. 1 seat outer belt shoulder anchor with the bolt.
42 N*m
428 kgf*cm
31 ft.*lbf
-
Attach the 2 claws to close the rear No. 1 seat outer belt shoulder anchor cover.
Connect the connector of the deck trim side panel assembly LH.
Attach the 6 clips and 7 claws to install the deck trim side panel.
Install the 2 bolts.
-
Connect the rear No. 1 seat outer belt floor anchor with the bolt.
42 N*m
428 kgf*cm
31 ft.*lbf
Note:Do not allow the anchor part of the rear No. 1 seat outer belt to overlap the protruding parts of the floor panel.
Table 1. Text in Illustration *1
Protruding Part
-
INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY
INSTALL DECK TRIM SIDE SERVICE HOLE COVER
INSTALL FRONT DECK SIDE TRIM COVER LH
INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
INSTALL REAR DOOR SCUFF PLATE LH
INSTALL REAR DECK TRIM COVER
INSTALL REAR DECK FLOOR BOX (w/o Rear No. 2 Seat)
INSTALL REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat)
INSTALL REAR NO. 2 SEAT TRACK COVER (w/ Rear No. 2 Seat)
INSTALL REAR NO. 2 SEAT TRACK BRACKET COVER (w/ Rear No. 2 Seat)
INSTALL DECK TRIM SIDE BELT HOLE COVER LH (w/ Rear No. 2 Seat)
INSTALL DECK TRIM SIDE BELT HOLE COVER RH (w/ Rear No. 2 Seat)
INSTALL DECK FLOOR BOX LH
INSTALL DECK FLOOR BOX RH
INSTALL LOWER DECK TRIM SIDE BOARD LH (w/o Rear No. 2 Seat)
INSTALL LOWER DECK TRIM SIDE BOARD RH (w/o Rear No. 2 Seat)
INSTALL DECK RAIL COVER (w/ Rear No. 2 Seat, w/o Spare Tire)
INSTALL LUGGAGE COMPARTMENT TRAY (w/ Rear No. 2 Seat, w/ Spare Tire)
INSTALL FRONT DECK FLOOR BOX (w/o Rear No. 2 Seat)
INSTALL DECK BOARD ASSEMBLY (w/ Rear No. 2 Seat)
INSTALL NO. 2 DECK BOARD (w/o Rear No. 2 Seat)
INSTALL NO. 1 DECK BOARD (w/o Rear No. 2 Seat)
INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)