STARTER(w/o Stop And Start System) REMOVAL

PROCEDURE

  1. REMOVE NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)

    Click hereClick here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereClick here

  3. REMOVE NO. 1 ENGINE UNDER COVER

  4. REMOVE BATTERY

    Click hereClick here

  5. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

    Click hereClick here

  6. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click hereClick here

  7. REMOVE NO. 3 AIR HOSE

    Click here

  8. REMOVE NO. 2 AIR TUBE

    Click hereClick here

  9. REMOVE NO. 1 AIR TUBE

    Click hereClick here

  10. REMOVE STARTER ASSEMBLY

    1. A244809

      Open the terminal cap.

    2. Remove the nut and disconnect terminal 30.

    3. Disconnect the connector and disengage the harness clamp.

    4. A204769

      Remove the 2 bolts and starter assembly.