IGNITION SWITCH INSPECTION

PROCEDURE

  1. INSPECT IGNITION SWITCH ASSEMBLY

    1. G035048E42

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Switch Condition

      Specified Condition

      All combinations of all terminals

      LOCK

      10 kΩ or higher

      2 (AM1) - 3 (ACC)

      ACC

      Below 1 Ω

      2 (AM1) - 3 (ACC)

      2 (AM1) - 4 (IG1)

      6 (IG2) - 7 (AM2)

      ON

      Below 1 Ω

      1 (ST1) - 2 (AM1)

      1 (ST1) - 4 (IG1)

      6 (IG2) - 7 (AM2)

      6 (IG2) - 8 (ST2)

      START

      Below 1 Ω
      Table 1. Text in Illustration

      *a

      Component without harness connected:

      (Ignition Switch Assembly)

      *b

      No Pin

      If the result is not as specified, replace the ignition switch assembly.