Tech Tips
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
| Symptom | Suspected Area | See page |
|---|---|---|
| When shift lever is in R position, rear view monitor image is not displayed (Screen is not black). | Proceed to "Reverse Signal Circuit" | |
| Proceed to "Display Signal Circuit between Navigation Receiver Assembly and Television Camera Assembly" | ||
| Proceed to "Navigation Receiver Assembly Power Source Circuit" | ||
| Replace navigation receiver assembly | ||
| When shift lever is in R position, rear view monitor image is not displayed (Screen is black). | Proceed to "Navigation Receiver Assembly Power Source Circuit" | |
| Proceed to "Display Signal Circuit between Navigation Receiver Assembly and Television Camera Assembly" | ||
| Replace rear television camera assembly | ||
| Replace navigation receiver assembly | ||
| When shift lever is not in R position, rear view monitor image is displayed. | Proceed to "Reverse Signal Circuit" | |
| Proceed to "Display Signal Circuit between Navigation Receiver Assembly and Television Camera Assembly" | ||
| Replace navigation receiver assembly |
| Symptom | Suspected Area | See page |
|---|---|---|
| Problem with the rear view monitor image (color, disorder of picture). | Check the usage conditions (Explain to the customer that the display may be temporarily distorted when the vehicle is close to an object that transmits radio waves, such as a telecommunication tower, an airport or a truck equipped with a transceiver) | - |
| Proceed to "Screen Flicker or Color Distortion" | ||
| Proceed to "Display Signal Circuit between Navigation Receiver Assembly and Television Camera Assembly" | ||
| Replace navigation receiver assembly | ||
| When the rear view monitor screen is displayed, the lines are misaligned (the image from the camera is tilted) | Check that the camera is correctly installed |