OIL PUMP REASSEMBLY

PROCEDURE

  1. INSTALL FRONT OIL PUMP OIL SEAL

    1. C188149N01

      Using SST and a hammer, install a new front oil pump oil seal to the front oil pump body sub-assembly.

      09350-32014

      09351-32140

      Oil seal driven in depth

      -0.25 to 0.25 mm (-0.00984 to 0.00984 in.)

    2. Coat the lip of the front oil pump oil seal with MP grease.

  2. INSTALL FRONT OIL PUMP BODY O-RING

    1. C138278

      Coat a new O-ring with ATF and install it to the front oil pump body sub-assembly.

      Note:

      Ensure that the O-ring is not twisted.

  3. INSTALL FRONT OIL PUMP DRIVEN GEAR

    1. C138277

      Coat the front oil pump driven gear with ATF and install it to the front oil pump body sub-assembly with the marked side facing up.

  4. INSTALL FRONT OIL PUMP DRIVE GEAR

    1. C138276

      Coat the front oil pump drive gear with ATF, and install it to the front oil pump body sub-assembly with the marked side facing up.

  5. INSTALL STATOR SHAFT ASSEMBLY

    1. C138275N02

      Align each knock pin of the stator shaft assembly with the holes in the front oil pump body sub-assembly and install the stator shaft assembly to the front oil pump body sub-assembly.

    2. Using a T30 "TORX" socket wrench, install the 16 bolts.

      9.3 N*m

      95 kgf*cm

      82 in.*lbf

      Tip:

      Bolt Length

      Bolt A: 14 mm (0.551 in.)

      Bolt B: 26 mm (1.02 in.)

  6. INSPECT OIL PUMP ASSEMBLY

    Click here