AIR CONDITIONING PANEL(for Automatic Air Conditioning System) INSTALLATION

PROCEDURE

1. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (except Sedan)

   1. Connect the connector.

   2. Engage the 2 claws and 5 clips to install the air conditioning control assembly.

2. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (except Sedan)

   w/ Radio Receiver:

   Click here

3. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY (except Sedan)

   Click here

4. INSTALL INSTRUMENT SIDE PANEL RH (except Sedan)

   Click here

5. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH (except Sedan)

   Click here

6. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL (except Sedan)

   Click here

7. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (except Sedan)

   Click here

8. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL (except Sedan)

   Click here

9. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Sedan)

   1. Connect the connector.

   2. Engage the 2 claws and 5 clips to install the air conditioning control assembly.

10. INSTALL NO. 1 SWITCH HOLE BASE (for Sedan)

    for LHD:

    Click here

    for RHD:

    Click here

11. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Sedan)

    Click here

12. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for Sedan)

    Click here

13. INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY (for Sedan)

    Click here

14. INSTALL NO. 1 INSTRUMENT PANEL REGISTER SUB-ASSEMBLY (for Sedan)

    Click here

15. INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY (for Sedan)

    Click here

16. INSTALL UPPER CONSOLE PANEL (for Sedan)

    Click here

17. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (for Sedan)

    Click here

18. INSTALL SHIFTING HOLE BEZEL (for Sedan)

    for Manual Transaxle:

    Click here

    for CVT:

    Click here

19. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Sedan)

    for Manual Transaxle:

    Click here

20. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for Sedan)

    for LHD with Entry and Start System:

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here