POWER WINDOW CONTROL SYSTEM(for Models with Jam Protection Function on Driver Door Window Only) Remote Up / Down Function does not Operate

DTC Code DTC Name
Remote Up / Down Function does not Operate

DESCRIPTION

When the ignition switch is ON, the power window regulator master switch assembly sends remote up and down signals to power window regulator switch assembly. Then, the power window regulator switch assembly drives each door window regulator assembly.

WIRING DIAGRAM

Refer to System Diagram.

Click here

CAUTION / NOTICE / HINT

Note:

Inspect the fuses for circuits related to this system before performing the following procedure.

PROCEDURE

  1. CHECK POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (WINDOW LOCK SWITCH)

    1. Turn the window lock switch off and operate the switches on the power window regulator master switch assembly. Check that the remote UP/DOWN function operates normally.

      OK

      Remote UP/DOWN function operates normally.

    Result

    Proceed to

    OK

    NG
    OK

    END

    NG

  2. CHECK POWER WINDOW CONTROL SYSTEM (USING POWER WINDOW REGULATOR SWITCH ASSEMBLY)

    1. Check front passenger door power window operation by using the power window regulator switch assembly.

      OK

      Only front passenger door power window operates normally by using power window regulator switch assembly.

    Result

    Proceed to

    OK

    NG
    OK

    REPLACE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY

    Click here

    NG

    GO TO OTHER PROBLEM (Front Passenger Side Power Window does not Operate with Front Passenger Side Power Window Switch)

    Click here