PANORAMIC VIEW MONITOR SYSTEM, Diagnostic DTC:C2A6C

DTC Code DTC Name
C2A6C Side Camera RH Response Malfunction

DESCRIPTION

During self diagnosis of the parking assist ECU, the parking assist ECU sends display mode ID signals to the side television camera assembly RH. This DTC is stored when the output of the side television camera assembly RH does not match the expected output.

DTC No. Detection Item DTC Detection Condition Trouble Area
C2A6C Side Camera RH Response Malfunction Abnormal response from the side television camera assembly RH
  • Side television camera assembly LH

  • Parking assist ECU

CAUTION / NOTICE / HINT

Note


  • When "!" mark is displayed on the multi-display assembly*1 or accessory meter assembly*2 after the cable is disconnected from the negative (-) battery terminal, correct the steering angle neutral point.

    Click here


    • *1: for 8 Inch Display

    • *2: for 12.3 Inch Display

  • Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the panoramic view monitor system may be needed.

    Click here

PROCEDURE


  1. CHECK FOR DTC


    1. Clear the DTCs.

      Click here


      Chassis > Panoramic View Monitor > Clear DTCs
    2. Check for DTCs.

      Click here


      Chassis > Panoramic View Monitor > Trouble Codes
      OK
      DTC C2A6C is not output.
      Result
      Proceed to
      OK
      NG

    OK
    NG
  2. REPLACE SIDE TELEVISION CAMERA ASSEMBLY RH


    1. Replace the side television camera assembly RH with a new or normally functioning one.

      Click here

      Result
      Proceed to
      NEXT

    NEXT
  3. CHECK FOR DTC


    1. Clear the DTCs.

      Click here


      Chassis > Panoramic View Monitor > Clear DTCs
    2. Check for DTCs.

      Click here


      Chassis > Panoramic View Monitor > Trouble Codes
      OK
      DTC C2A6C is not output.
      Result
      Proceed to
      OK
      NG

    OK
    NG