OIL PRESSURE SWITCH INSTALLATION

PROCEDURE


  1. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY


    1. A004HXFE43
      Text in Illustration
      *1 Adhesive

      Apply adhesive to 2 or 3 threads of the engine oil pressure switch assembly.

      Adhesive
      Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent

    2. Using a 24 mm deep socket wrench, install the engine oil pressure switch assembly.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

      Note

      Do not start the engine for at least 1 hour after installation.

    3. Connect the engine oil pressure switch connector.

  2. INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Click here

  4. INSPECT FOR OIL LEAK


    1. Start the engine.

    2. Check for engine oil leaks from the engine oil pressure switch assembly.

  5. CHECK ENGINE OIL LEVEL

    Click here