DOOR CONTROL RELAY REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

    Click here

  4. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for LHD)

    Click here

  5. REMOVE DOOR SCUFF PLATE ASSEMBLY RH (for RHD)

    Click here

  6. REMOVE COWL SIDE TRIM BOARD RH (for RHD)

    Click here

  7. REMOVE CONSOLE ARMREST ASSEMBLY (for RHD)

    Click here

  8. REMOVE UPPER REAR CONSOLE PANEL (for RHD)

    Click here

  9. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH (for RHD)

    Click here

  10. REMOVE INSTRUMENT SIDE PANEL RH (for RHD)

    Click here

  11. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY (for RHD)

    Click here

  12. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

    Click here

  13. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL (for RHD)

    Click here

  14. REMOVE ECU INTEGRATION BOX RH (for LHD)

    Click here

  15. REMOVE ECU INTEGRATION BOX RH (for RHD)


    1. B008HY6

      Disconnect the connectors.

    2. Detach the clamp.

    3. B008JJOC01
      B008IUL Nut
      B008H52 Bolt

      Remove the 2 nuts and bolt.

    4. Detach the clamp and remove the ECU integration box RH.

  16. REMOVE DOUBLE LOCK DOOR CONTROL RELAY ASSEMBLY (for LHD)


    1. B008HYL

      Detach the 2 claws and remove the double lock door control relay assembly.

  17. REMOVE DOUBLE LOCK DOOR CONTROL RELAY ASSEMBLY (for RHD)


    1. B008HV2

      Detach the 2 claws and remove the double lock door control relay assembly.