OCCUPANT CLASSIFICATION SYSTEM DIAGNOSIS SYSTEM
CHECK DLC3
Check the DLC3.
FUNCTION OF PASSENGER AIRBAG ON/OFF INDICATOR
Initial check
Turn the ignition switch to ON.
The passenger airbag ON/OFF indicator comes on for approximately 4 seconds, and then goes off for approximately 2 seconds.
Approximately 6 seconds after the ignition switch is turned to ON, the passenger airbag ON/OFF indicator will indicate ON/OFF depending on the conditions listed below.
Table 1. Indicator Operation Front Passenger Seat Condition
Passenger Airbag ON/OFF Indicator
SRS Warning Light
ON Indicator
OFF Indicator
Vacant
Off
On
Off
Adult is seated.
On
Off
Off
Child is seated.
Off
On
Off
Child restraint system is installed.
Occupant classification system failure
Off
On
On
Tip:The passenger airbag ON/OFF indicator illuminates based on the timing chart below in order to check the indicator light circuit.
When the occupant classification system has trouble, both the SRS warning light and passenger airbag ON/OFF indicator ("OFF") come on. In this case, check for DTCs in the airbag system first.
CHECK PASSENGER AIRBAG ON/OFF INDICATOR
-
Turn the ignition switch to ON.
Check that the passenger airbag ON/OFF indicator ("ON" and "OFF") comes on for approximately 4 seconds, and then goes off for approximately 2 seconds.
Tip:Refer to the indicator operation table in the preceding step regarding the passenger airbag ON/OFF indicator when the ignition switch is turned to ON and approximately 6 seconds elapse.
-